Detailed Product Description
Gigabit LAN based Video Wall Box
-
DVW3-FHD the Full HD Video Wall Controller/Extender over IP adopts the brand new technology and design to encode the full HD 1080P AV signal to standard Gigabit Ethernet packets at TX and decoded back to the original signal with high quality and low loss at RX . Besides, all video wall commands and settings are also transmitted via the same CAT5E/CAT6 cable to each RX. By simple network cabling work users can easily set up any 2x2, 3x3, 4x4, …, and NxM full HD video wall.
-
Each monitor has to work with a receiver box. And needs only one CAT5E/CAT6 cable to connect one box to another box from the built-in gigabit (1Gbps) switching hub. A wall with multiple RX needs only one Cat5E/Cat6 cable to connect TX. So, It makes video walls installation and set up a simple and easy job.
-
The transmission distance between the TX and the RX, or between RXs is up to 100 meters. To add one more gigabit switching hub between them can extend to 200 meters, two hubs to 300 meters, and so on.
-
To sum up, this product makes the installation of video walls become very simple and easy. Longer transmission distance, fewer cabling works, smarter hardware and software brings much more brilliance and innovation to your system design and various applications.
-
Breakthroughs and Highlights
-
Video Wall commands and Full HD AV signals are merged and transmitted via the same one CAT5E /CAT6 network cable instead of extra RS-232 daisy chain.
-
For reducing data loss and enhancing noise immunity, all Full HD 1080P AV signal is encoded into and decoded from Network Packets during data transmission.
-
Built-in 3-Port Gigabit Switching Hub in both transmitter(TX) and receiver(RX) boxes.
-
Almost no signal distortion after hundreds of meters transmission.
-
By using only CAT5E/ CAT6 cables between wall side receivers as well as from source side transmitter to remote side receivers to simplify cabling work.
-
Each receiver box has a RS-232 output port (DB-9) which can be connected to LCD monitor or any other equipment with RS-232 port to perform remote control such as Power ON/OFF, Input select or others.
-
The receiver box builds in an ultra low power consumption OLED module to display BOX ID, Group ID, Resolution, Video Wall Array, Wall Position, MAC address, and Connecting Status
-
BOX ID can be assigned manually by user in advance and will auto report to host, and Wall Position of each box can be set by software to make wall installation much more easier.
-
Group ID of each box can be changed remotely by software to receive different contents.
-
The receiver (RX) can be reset or reboot indvisually remotely by software to restart RX firmware.
-
All settings inside each RX can be read back and each OLED can be turned either on or off remotely by software.
-
Free offer an user friendly Video Wall Control Software (Video DJ-2)
| |
|
|
| Issue Time: |
|
2024-04-25 |
| Expire Time: |
|
2024-09-13 |
Keywords: Video Wall Video Wall Box
