Acrylic Primer AP-300 is an acrylic emulsion copolymer with very fine particle sizes and good adhesion to many different substrates. It can penetrate into the substrates to form a strong network, provide high level of water resistance, improve the adhesion between old and new concretes, and help the workability for self-leveling concretes.
Acrylic Primer AP-300 has the following benefits:
-
Excellent water and abrasion resistance
-
Good adhesion to the substrates and excellent water repellency
-
Good workability
-
Environmental friendly
-
Suitable for any construction work
Typical Physical Properties
Appearance: Light translucent emulsion
Solids: 49.0 ±1.0%
pH: 8.0 ±1.0
Specific gravity: 1.06
Viscosity: 8,000 ± 3,000 cps (Brookfield, RVT, #6, 5 rpm)
Tg: 15℃
Method of Use
Remove all loose material and contaminates from substrate. Apply a thin uniform coating of Acrylic Primer AP-300 (diluted with 4X volumes of water) using either a spray or a brush. About thirty minutes later, apply the second coating of Acrylic Primer AP-300 (diluted with 2X volumes of water). Allow Primer to dry and make sure the ground is tack free (about 30 minutes), then apply self-leveling underlayment, concrete, elastic cement or any other construction works. The coverage of Acrylic Primer AP-300 will depend on surface porosity; usually 1Kg Acrylic Primer AP-300 can cover about 5 to 7 square meters.
|
|
|
Issue Time: |
|
2024-05-14 |
Expire Time: |
|
2024-10-18 |