• 1/2"
• 20 - 110 Nm
• +3%

Introduction

1 CMKG = 13.883 IN-OZ
1 Nm = 8.8507 IN-LB
1 dNm = 0.0553 IN-OZ
1 MKG = 7.233 FT-LB
1 MKG = 9.80665 Nm 1 CMKG = 0.098 Nm
1 CMKG = 0.08677 IN-LB
1 KpM = 1 MKG
1 Nm = 0.73756 FT-LB

Applications

1. Always follow available manufacturer's specifications for fastener torque settings.
2. Any assembly held together by a number of fasteners (such as the lug nuts on an automobile wheel) should be tightened according to manufacturer's specifications. If no specifications are available, it is recommended that fasteners be tightened in two or more stages. For example, first tighten each faster to 75% of the total torque to be applied, then reset the wrench and tighten to the full torque required. Finally, double check each fastener to make sure none were missed.
3. Never use a torque wrench on a fastener that is already tightened with a standard wrench or pocket. For accurate torque readings, the fastener must be loosened, then retightened to the desired torque.