■ Features
1. Good dilution, UV light low energy can be cured.
2. Excellent anti-fog performance and high transparency.
3. Good adhesion, low warpage.  
 
 ■ Specifications
1.Chemical Composition: Acrylic resin
2.Physical Status: Fluid @ 25 ℃
3.Appearance: Clear yellow
4.Solid content: 50 ± 3%
5.Viscosity (26 ℃): 30 ↓ cps
6.Resin gravity: 1.06 ± 0.05 g / cm3
 
■ Curing conditions
1. Ruoyu diluted, it is recommended to IPA diluted to an appropriate proportion.
2. The temperature of the oven (four): 80,85,90,90 ℃; UV accumulated energy: 300 ~ 360mj / cm2.
3 recommendation by the membrane surface primer applied to deal with it.
 
■ finished properties (Sunbeam C87H 100μmPET)
1.Coating thickness: 8 ~ 10μm (dry film thickness)
2.Penetration (400 ~ 700nm): 90 ↑%
3.Pencil Hardness (weight 500g): HB ~ F
4.100 grid knives (after molding): 5B
5.60 ℃ steam 3 to 5 seconds fogging 100 P: ass
6.90 ℃ steam fogging 3 to 5 seconds 20 times: Pass
7.Water soak 10 hours, naturally dried 12 hours after anti-fog: Pass
8.Water soak 10 hours, 12 child naturally dry-fog: Pass