PEEK is a high-temperature-resistant thermoplastic and can be used continuously up to 260℃ and in hot water or steam. It displays outstanding mechanical performance in both high temperature and cryogenic conditions.

When exposed to a flame there is very low smoke and toxic gas emission. PEEK compliant for food contact. It resists a wide range of solvents and organic solvents. It is self-extinguishing and carries a flammability UL 94 V-0 rating.

Specification table:
Hexagon Socket Head Cap Bolt

SPEC          Length	M3	M4	M5	M6	M8	M10
6		V
8	V
10	V	V	V	V
12		V
15		V	V	V	V	V
20			V	V	V
40				V

Link Upon Advanced Material Corp. is manufacturing plastic screw such as PEEK. PPS. NYLON. PVDF. Polycarbonate. Polypropylene.

The specification table is our stock sales only, if you need other sizes, please contact with us.

• Black spots may appear on the external surface. However, this has no impact on performance.
• Gate residue of screw head is <=0.2mm
• Since pitch misalignment of screw may happen during molding, use with a nut to compensate for thread molding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20 mm.
• Heat resistance and chemical resistance changes depending on use conditions; make sure to test under actual use conditions beforehand.
• Discoloration to some extent may occur depending on lot and possible various conditions.  

Package: plastic bag sealed, standard export carton.

Issue Time:		2024-06-16
Expire Time:		2025-04-05