MIX Matrix Switcher

EB-MIXxxyy is a modular design and mix signal type Matrix Switcher which supports various input formats such as HDMI, DVI, VGA, CVBS, S-Video, YPbPr, SDI and also various output formats such as HDMI, DVI, VGA, SDI etc., Both input and output format can be mixed based on module.

Features:

1. Input/output: Support up to 36 inputs and 36 outputs. And also support different signals cross switching by using embedded multiple channel design.
2. Input/output module: 4 channels per each modular board, and all input modular boards can be mixed by different signal format.
3. Modular design inputs: Support Video, VGA, YPbPr, DVI, HDMI, HD-SDI, LAN.
4. Modular design outputs: Support HDMI, DVI, YPbPr, VGA, LAN. Easy to expand and replace on these modular IO boards.
5. Long cable driving capability: Each input is bundled a automatic equalizer which is valid to reduce signal jitter caused by long distance transmission. And each output is bundled a line driver to make sure signal quality is good enough on receiving end after long distance transmission. Support input receive delay buffer to compensate time shift on differential pair.
6. HDCP Compatibility: All media with content protection such as blu-ray DVD, GAME BOX can surely be played.
7. Support EDID logical operation: Matrix switcher can read all EDID from connected displays and do logical operation automatically to get their intersection or union of EDID set. While one input is switched and driven to many output ports with different resolutions, matrix switcher will generate a best choice of resolution and then trigger signal source to change to that specified resolution (AUTO mode).
8. Bundled switching scenario memory to prevent data loss while power failure. Totally 32 scenario can be stored and used.
9. Support full high definition:: Including 1080p/60 HDTV modes and up to 1920*1200 of  PC modes. 
10. Support 3D, HDMI 1.4, HDCP, and DVI 1.0 standard. Support high color depth, and up to 6.5Gbps high data rate.
11. Built in loop-switching function, and its time interval and port sequence can be set friendly.
12. Support separated switching mode on high speed signal and embedded control signal.
13. Flexible control: Not only by panel push buttons, RS-485 extended keyboard, but 2 RS-232 COM ports and one LAN port, users can use it easily to connect with any remote equipment.
14. Redundant dual power supply design: While one power module was out of order, another one will take over all job automatically to ensure normal operation.
15. Surface mount (SMD) insertion，well designed with ESD Electrostatic Protection
16. Global wide range voltage design: Auto sensing AC 100～240V，50/60Hz.

Technical Specification:

1. Input module capacity:
   (Model A) 8 modular boards, 2 port per board. Totally 16
   (Model B) 9 modular boards, 4 port per board. Totally 36
2. Output module capacity:
   (Model A) 8 modular boards, 2 port per board. Totally 16
   (Model B) 9 modular boards, 4 port per board. Totally 36
3. Input module signal format: Video, VGA, YPbPr, DVI, HDMI, HD-SDI, LAN.
4. Output module signal format:VGA, YPbPr, DVI, HDMI, HD-SDI, LAN.
5. Data bandwidth: 6.75Gbps，digital(Totally 6.75Gbps，each color is 2.25Gbps).
6. Serial port: RS-232，9-pin female  D type connector.
7. COM port protocol: 9600 bps , N81
8. COM port pin assignment: 2 = TX，3 = RX，5 = GND.
9. LAN port: RJ-45
10. LAN protocol: TCP/IP.
11. LAN speed: 10M/100M，Full or half duplex.

Common Specification:

1. Power: 110VAC～240VAC，50/60Hz, Auto sensing
2. Temperature: Storage/Operating -20℃～+70°C.
3. Humidity: Storage/Operating  10%～90%
4. MTBF: 78,000 Hours
5. 19" rack mount chassis, and height depends on Ports.

Popular Models:
Module Type 2in or 2out  ( Signal type can be mixed)
MIX0808   
MIX1616

Module Type 4in or 4out  ( Signal type can be mixed)
MIX2020
MIX2424
MIX2828
MIX3232
MIX3636